Journal of Theoretical and Applied Vibration and Acoustics

Author Index

A

Abrishami Moghaddam, Hamid Application of Model-Based Estimation to Time-Delay Estimation of Ultrasonic Testing Signals [Volume 1, Issue 1, 2015, Pages 10-20]
Adel, Farhad Finite element model updating of bolted lap joints implementing identification of joint affected region parameters [Volume 2, Issue 1, 2016, Pages 65-78]
Afsharfard, Aref A novel modeling of energy extraction from nonlinear vortex-induced vibrations [Volume 6, Issue 2, 2020, Pages 217-232]
Aghanajafi, Cyrus Investigation of the efficiency of various reactive mufflers by noise reduction and transmission loss analyses [Volume 4, Issue 2, 2018, Pages 125-140]
Aghasizade, Sajjad An integrated strategy for vehicle active suspension and anti-lock braking systems [Volume 3, Issue 1, 2017, Pages 97-110]
Ahmadi, Samaneh Application of intelligent adaptive force control for a helicopter seat suspension [Volume 6, Issue 1, 2020, Pages 183-200]
Ahmadian, Hamid Model identification and dynamic analysis of ship propulsion shaft lines [Volume 1, Issue 2, 2015, Pages 85-95]
Ahmadian, Hamid Adhesive joint modeling using compatible element formulation [Volume 2, Issue 2, 2016, Pages 133-144]
Ahmadian, Hamid Nonlinear lap joint interface modeling and updating strategies for assembled structures [Volume 5, Issue 2, 2019, Pages 131-152]
Ahmadian, Hamid Modeling and identification of nonlinear behavior of friction vibratory separators using iwan model [Volume 9, Issue 1, 2023, Pages 1-13]
Ahmadpour fard, Ahad In-plane and out of plane free vibration in nano ultra-thin film using a general nonlocal Kirchhoff ultra-thin film model [Volume 6, Issue 1, 2020, Pages 159-182]
Ajri, Masoud Vibration simulation and fatigue life estimation of a printed circuit board using a validated model [Volume 7, Issue 1, 2021, Pages 29-42]
Akbarinasab, Mohmmad Plume outflow intrusion impact on acoustical signal fluctuations in a pre-stratified environment [Volume 1, Issue 2, 2015, Pages 107-121]
Akhavessiy, Amir Huoshang Influences of temporal evolution of ground motion frequency content on developed dynamic ratcheting in SDOF systems [Volume 4, Issue 2, 2018, Pages 189-204]
Alavi, Seyyed Mahmoud A new analytical approach for axisymmetric free vibration of circular magnetorheological fluid sandwich plate [Volume 6, Issue 2, 2020, Pages 233-248]
Amani, Hosein Nonlinear vibration analysis of axially moving strings in thermal environment [Volume 4, Issue 2, 2018, Pages 153-170]
Amini, Saeid Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming [Volume 5, Issue 1, 2019, Pages 1-10]
Amiri, Ahad Wave propagation analysis of magneto-electro-thermo-elastic nanobeams using sinusoidal shear deformation beam model and nonlocal strain gradient theory [Volume 5, Issue 2, 2019, Pages 153-176]
Arghand, Hesam Addin Investigation on the effects of measurement and temporal uncertainties on rolling element bearings prognostics [Volume 6, Issue 1, 2020, Pages 1-16]
Arghand, Hesam Addin Comparison between shock pulse method and vibration analysis methods on early fault detection of rolling element bearing [Volume 7, Issue 2, 2021, Pages 139-156]
Arghand, Hesam Addin Fault detection of rolling element bearing using a temporal signal with artificial intelligence techniques [Volume 7, Issue 1, 2021, Pages 55-71]
Asadi, Mostafa Effect of non-acoustic properties on the sound absorption of polyurethane foams [Volume 1, Issue 2, 2015, Pages 122-132]
Asghari, Mohsen A Semi-analytical Solution for Flexural Vibration of Micro Beams Based on the Strain Gradient Theory [Volume 1, Issue 1, 2015, Pages 48-61]
A. Shirazi, Farzad Finite element model updating of a geared rotor system using particle swarm optimization for condition monitoring [Volume 5, Issue 2, 2019, Pages 95-114]
A. Shirazi, Farzad Vibration simulation and fatigue life estimation of a printed circuit board using a validated model [Volume 7, Issue 1, 2021, Pages 29-42]
Azimi, Seyed Alireza Nondestructive thickness mapping of corroded plate structures using guided lamb wave propagation [Volume 7, Issue 1, 2021, Pages 15-28]

B

Baghiee, Neda Damage detection of multi-girder bridge superstructure based on the modal strain approaches [Volume 5, Issue 1, 2019, Pages 21-42]
Baghiee, Neda Damage Diagnosis of Bridge Girders via Modal Flexibility Deflections, Inertia Force vectors, and strain energies [Volume 6, Issue 2, 2020, Pages 364-387]
Bahrami, Arash Multi-frequency piezomagnetoelastic energy harvesting in the monostable mode [Volume 4, Issue 1, 2018, Pages 1-18]
Bahrami, Arash Vibrational energy harvesting from a monostable piezomagnetoelastic structure with multi-frequency excitation [Volume 6, Issue 2, 2020, Pages 337-347]
Bahrami, Mahdi A theoretical approach for flexural behavior of FG vibrating micro-plates with piezoelectric layers considering a hybrid length scale parameter [Volume 6, Issue 1, 2020, Pages 51-68]
Bakhtiari-Nejad, Firooz Evaluation of cantilever plates in the spinning situation: time histories and modal characteristics [Volume 6, Issue 1, 2020, Pages 17-34]
Bakhtiari-Nejad, Firooz Free vibration and aeroelastic analyses of rectangular cantilever plates including correlation with experiment [Volume 6, Issue 1, 2020, Pages 103-118]
Barani, Abbas Vibration damping of piezo actuating composite beams based on the multi-objective genetic algorithm [Volume 6, Issue 2, 2020, Pages 325-336]
Behzad, Mehdi Investigation on the effects of measurement and temporal uncertainties on rolling element bearings prognostics [Volume 6, Issue 1, 2020, Pages 1-16]
Behzad, Mehdi Comparison between shock pulse method and vibration analysis methods on early fault detection of rolling element bearing [Volume 7, Issue 2, 2021, Pages 139-156]
Behzad, Mehdi Fault detection of rolling element bearing using a temporal signal with artificial intelligence techniques [Volume 7, Issue 1, 2021, Pages 55-71]
Beigzadeh, Borhan Classification of Iranian traditional musical modes (DASTGÄH) with artificial neural network [Volume 2, Issue 2, 2016, Pages 107-118]
Belali Koochesfahani, Mojtaba Classification of Iranian traditional musical modes (DASTGÄH) with artificial neural network [Volume 2, Issue 2, 2016, Pages 107-118]
Boorghan Farahan, Sajjad Nonlinear dynamic analysis of a four-bar mechanism having revolute joint with clearance [Volume 2, Issue 1, 2016, Pages 91-106]
Bozorgi, Alireza Investigation of Similarity or Dissimilarity in Aerodynamic Performance and Noise Pollution of H-Darrieus Wind Turbines [Volume 8, Issue 2, 2022]

C

Comeaga, Constantin Daniel New Dynamic Balancing System Based on Magnetic Interaction and Software Removal of some Perturbations [Volume 1, Issue 1, 2015, Pages 41-47]

D

Dardel, Morteza Nonlinear Dynamics and Control of Crank-Slider Mechanism with Multiple Clearance Joints [Volume 1, Issue 1, 2015, Pages 21-31]
Dardel, Morteza Nonlinear energy harvesting through a multimodal electro-mechanical system [Volume 1, Issue 2, 2015, Pages 73-84]
Davoodabadi, Ali Comparison between shock pulse method and vibration analysis methods on early fault detection of rolling element bearing [Volume 7, Issue 2, 2021, Pages 139-156]
Davoodabadi, Ali Fault detection of rolling element bearing using a temporal signal with artificial intelligence techniques [Volume 7, Issue 1, 2021, Pages 55-71]
Davoodi, Mohammadreza Vibration analysis of two-layered microplate based on the modified couple stress theory using penalty approach [Volume 8, Issue 1, 2022, Pages 1-12]
Dehghan, Narges Assessment of the acoustical condition of metro stations by emphasizing auditory satisfaction (Case Studies: Saat and Khayyam Metro Stations) [Volume 7, Issue 2, 2021, Pages 118-138]
Dehghani, Reza The effect of distance and dimensions of magnets on nonlinear behavior of piezomagnetoelastic bimorph energy harvester [Volume 4, Issue 1, 2018, Pages 37-64]
Dehghani, Reza The influence of magnetorheological dampers on the biodynamic response of the human (pilot) body in various flight maneuvers [Volume 6, Issue 1, 2020, Pages 81-102]
Dowell, Earl H Free vibration and aeroelastic analyses of rectangular cantilever plates including correlation with experiment [Volume 6, Issue 1, 2020, Pages 103-118]
Dowell, Earl H Evaluation of cantilever plates in the spinning situation: time histories and modal characteristics [Volume 6, Issue 1, 2020, Pages 17-34]

E

Ebrahimi, Mohamad Transverse and longitudinal dynamic modeling of bimorph piezoelectric actuators with investigating the effect of vibrational modes [Volume 4, Issue 1, 2018, Pages 99-124]
Ebrahimi, Saeed Application of the method of multiple scales for nonlinear vibration analysis of mechanical systems with dry and lubricated clearance joints [Volume 3, Issue 1, 2017, Pages 41-60]
Ebrahimi, Saeed A periodic folded piezoelectric beam for efficient vibration energy harvesting [Volume 3, Issue 2, 2017, Pages 223-238]
Ebrahimi-Nejad, Salman Experimental study on the impact of variations in the friction material properties on the vibration behaviour of brake pads [Volume 9, Issue 2, 2023, Pages 21-38]
Elhami, Mohammad Reza Fluid-structure interaction and vibration analysis of the fuel system of a turbofan engine with optimal dimensions [Volume 6, Issue 2, 2020, Pages 281-300]
Erfani, Seyyed Ali Three-dimensional underwater image formation with inverse synthetic aperture sonar [Volume 6, Issue 2, 2020, Pages 249-270]
Esfahani, Mohamad Reza Damage detection of multi-girder bridge superstructure based on the modal strain approaches [Volume 5, Issue 1, 2019, Pages 21-42]
Esfahani, Mohammad. Reza Damage Diagnosis of Bridge Girders via Modal Flexibility Deflections, Inertia Force vectors, and strain energies [Volume 6, Issue 2, 2020, Pages 364-387]
Eskandari, Amir Investigation of dynamic-thermal stress intensity factor in functionally-graded plates having an edge crack [Volume 7, Issue 1, 2021, Pages 72-87]
Eskandarzade, Mehdi Numerical and analytical investigation of an ultrasonic assisted ECAP process [Volume 2, Issue 2, 2016, Pages 167-184]

F

Fadaee, Mohammad A new analytical approach for axisymmetric free vibration of circular magnetorheological fluid sandwich plate [Volume 6, Issue 2, 2020, Pages 233-248]
Fakhari, Vahid Optimal characteristics determination of engine mounting system using TRA mode decoupling with emphasis on frequency responses [Volume 3, Issue 2, 2017, Pages 111-126]
Farahza, Nariman The effects of muqarnas and mortar joints on the acoustic quality of the jaame mosque of yazd [Volume 6, Issue 1, 2020, Pages 119-132]
Faraji, Ghader Numerical and analytical investigation of an ultrasonic assisted ECAP process [Volume 2, Issue 2, 2016, Pages 167-184]
Farooghi, Shirko In-plane and out of plane free vibration in nano ultra-thin film using a general nonlocal Kirchhoff ultra-thin film model [Volume 6, Issue 1, 2020, Pages 159-182]
Faroughi, Shirko Free in-plane vibration of heterogeneous nanoplates using Ritz method [Volume 2, Issue 1, 2016, Pages 1-20]
Faroughi, Shirko Isogeometric analysis: vibration analysis, Fourier and wavelet spectra [Volume 3, Issue 2, 2017, Pages 145-164]
Faroughi, Shirko Free vibration and wave propagation of thick plates using the generalized nonlocal strain gradient theory [Volume 3, Issue 2, 2017, Pages 165-198]
Farrokhnia, Morteza Finite element model updating of a geared rotor system using particle swarm optimization for condition monitoring [Volume 5, Issue 2, 2019, Pages 95-114]
Fathzadeh, Mehran Vibration simulation and fatigue life estimation of a printed circuit board using a validated model [Volume 7, Issue 1, 2021, Pages 29-42]
Fazilati, Jamshid Free vibration analysis of variable stiffness composite laminated thin skew plates using IGA [Volume 4, Issue 2, 2018, Pages 171-188]

G

Ghafarirad, Hamed Transverse and longitudinal dynamic modeling of bimorph piezoelectric actuators with investigating the effect of vibrational modes [Volume 4, Issue 1, 2018, Pages 99-124]
Ghaffari, Abbas The effects of muqarnas and mortar joints on the acoustic quality of the jaame mosque of yazd [Volume 6, Issue 1, 2020, Pages 119-132]
Ghaffari, Abbas Assessment of the acoustical condition of metro stations by emphasizing auditory satisfaction (Case Studies: Saat and Khayyam Metro Stations) [Volume 7, Issue 2, 2021, Pages 118-138]
Ghanbari, Bakhtiyar Influences of temporal evolution of ground motion frequency content on developed dynamic ratcheting in SDOF systems [Volume 4, Issue 2, 2018, Pages 189-204]
Ghasemi, Mohammad Hasan Nonlinear energy harvesting through a multimodal electro-mechanical system [Volume 1, Issue 2, 2015, Pages 73-84]
Ghasemi, Mohsen A theoretical approach for flexural behavior of FG vibrating micro-plates with piezoelectric layers considering a hybrid length scale parameter [Volume 6, Issue 1, 2020, Pages 51-68]
Ghazavi, Mohammad Reza Nonlinear dynamic analysis of a four-bar mechanism having revolute joint with clearance [Volume 2, Issue 1, 2016, Pages 91-106]
Ghodrati, Behzad Artificial neural network to predict the health risk caused by whole body vibration of mining trucks [Volume 3, Issue 1, 2017, Pages 1-14]
Gholami, Ali Application of Model-Based Estimation to Time-Delay Estimation of Ultrasonic Testing Signals [Volume 1, Issue 1, 2015, Pages 10-20]
Ghoudjani, Mohamadjavad Instantaneous Angular Speed (IAS) signal for abnormal combustion diagnosis in an I.C. engine [Volume 7, Issue 1, 2021, Pages 1-14]
Gohari, Mohamad Application of intelligent adaptive force control for a helicopter seat suspension [Volume 6, Issue 1, 2020, Pages 183-200]
Gohari, Mohamad Optimisation, development and evaluation of a tractor seat suspension via artificial intelligent method [Volume 9, Issue 2, 2023, Pages 54-64]
Goushegir, Seyed Mohammad Hossein Free in-plane vibration of heterogeneous nanoplates using Ritz method [Volume 2, Issue 1, 2016, Pages 1-20]
Goushegir, Seyed Mohammad Hossein Free vibration and wave propagation of thick plates using the generalized nonlocal strain gradient theory [Volume 3, Issue 2, 2017, Pages 165-198]

H

Haddad Khodaparast, Hamed Detection of localized nonlinearity in dynamical systems using base excitation experimental results [Volume 6, Issue 1, 2020, Pages 35-50]
Haeri Yazdi, Mohammad Reza Multi-frequency piezomagnetoelastic energy harvesting in the monostable mode [Volume 4, Issue 1, 2018, Pages 1-18]
Hairi Yazdi, Mohammad Reza Exact analytical approach for free longitudinal vibration of nanorods based on nonlocal elasticity theory from wave standpoint [Volume 3, Issue 1, 2017, Pages 61-76]
Hairi Yazdi, Mohammad Reza Robust adaptive vibration control of nonlocal strain gradient [Volume 7, Issue 2, 2021, Pages 99-117]
Hajhosseini, Mohammad A periodic folded piezoelectric beam for efficient vibration energy harvesting [Volume 3, Issue 2, 2017, Pages 223-238]
Hashemi, Mehdi A Semi-analytical Solution for Flexural Vibration of Micro Beams Based on the Strain Gradient Theory [Volume 1, Issue 1, 2015, Pages 48-61]
Hashemi, Ramin Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming [Volume 5, Issue 1, 2019, Pages 1-10]
Hassan Ghasemi, Mohammad Nonlinear Dynamics and Control of Crank-Slider Mechanism with Multiple Clearance Joints [Volume 1, Issue 1, 2015, Pages 21-31]
Hatam, Salar A new multi-switch circuit with adaptive capacitance for semi-active piezoelectric shunt damping [Volume 5, Issue 2, 2019, Pages 177-190]
Heidarpour, Behzad Vibration analysis of two-layered microplate based on the modified couple stress theory using penalty approach [Volume 8, Issue 1, 2022, Pages 1-12]
Hemmasian Ettefagh, Massoud Experimental control of a ‎f‎lexible ‎l‎ink ‎by ‎the ‎method ‎of‎ ‎Controlled Lagrangian [Volume 4, Issue 1, 2018, Pages 81-98]
Honarvar, Farhang Application of Model-Based Estimation to Time-Delay Estimation of Ultrasonic Testing Signals [Volume 1, Issue 1, 2015, Pages 10-20]
Honarvar, Farhang A one-dimensional model for variations of longitudinal wave velocity under different thermal conditions [Volume 2, Issue 1, 2016, Pages 79-90]
Honarvar, Farhang Numerical modeling of the propagation of ultrasonic waves in AISI 316L welds made by SMAW and GTAW processes [Volume 6, Issue 1, 2020, Pages 69-80]
Honarvar, Farhang Variations of ultrasonic wave attenuation in thick-walled cylinders subjected to a thermal gradient [Volume 7, Issue 1, 2021, Pages 43-54]
Hosseini, Seyyed Hossein Numerical modeling of the propagation of ultrasonic waves in AISI 316L welds made by SMAW and GTAW processes [Volume 6, Issue 1, 2020, Pages 69-80]

I

Ilie, Cristinel New Dynamic Balancing System Based on Magnetic Interaction and Software Removal of some Perturbations [Volume 1, Issue 1, 2015, Pages 41-47]
Irannejad-Parizi, Mostafa Reduction of tire noise by modifying tread pattern characteristics [Volume 7, Issue 2, 2021, Pages 88-98]
Izanlo, Hassan Fault detection of rolling element bearing using a temporal signal with artificial intelligence techniques [Volume 7, Issue 1, 2021, Pages 55-71]

J

Jafari, Ali-Asghar An analytical approach for the nonlinear forced vibration of clamped-clamped buckled beam [Volume 3, Issue 2, 2017, Pages 127-144]
Jafari, Mohammad Saeid An analytical approach for the nonlinear forced vibration of clamped-clamped buckled beam [Volume 3, Issue 2, 2017, Pages 127-144]
Jafarzadeh, Hossein A method to reduce wall mounted boiler noise pollution by a sustainable approach [Volume 6, Issue 1, 2020, Pages 133-142]
Jahani, Kamal Hybrid method for studying the effect of the material change on the blade vibration behavior [Volume 5, Issue 2, 2019, Pages 85-94]
Jahani, Kamal Investigation of reducing road-induced loads on sensitive payloads carried by road vehicles using a secondary suspension system containing double-ended magnetorheological dampers [Volume 6, Issue 2, 2020, Pages 388-409]
Jalali, Hassan Model identification and dynamic analysis of ship propulsion shaft lines [Volume 1, Issue 2, 2015, Pages 85-95]
Jalali, Hassan Adhesive joint modeling using compatible element formulation [Volume 2, Issue 2, 2016, Pages 133-144]
Jalali, Hassan Attenuating vibration transmission from a Town Board Station (TBS) to the neighbor residential building using an optimum isolator: A case study [Volume 5, Issue 1, 2019, Pages 43-54]
Jalali, Hassan Detection of localized nonlinearity in dynamical systems using base excitation experimental results [Volume 6, Issue 1, 2020, Pages 35-50]
Jalali, Hassan Instantaneous Angular Speed (IAS) signal for abnormal combustion diagnosis in an I.C. engine [Volume 7, Issue 1, 2021, Pages 1-14]
Jalili, Mohammad Mahdi Experimental investigation of the gyroscopic and rotary inertia effects on the chatter boundary in a milling process [Volume 5, Issue 2, 2019, Pages 115-130]
Jamshidi, Hossein Analytical Determination of Bouc-Wen Friction Model of Two Contacted Flat Rough Surfaces in Elastic Region [Volume 7, Issue 2, 2021]

K

Kamalie Egoli, Ali A magnetorheological fluid damper for robust vibration control of flexible rotor-bearing systems: A comparison between sliding mode and fuzzy approaches [Volume 3, Issue 1, 2017, Pages 77-96]
Karimi, Mahdi A theoretical approach for flexural behavior of FG vibrating micro-plates with piezoelectric layers considering a hybrid length scale parameter [Volume 6, Issue 1, 2020, Pages 51-68]
Kazemi Mehrabadi, Milad A magnetorheological fluid damper for robust vibration control of flexible rotor-bearing systems: A comparison between sliding mode and fuzzy approaches [Volume 3, Issue 1, 2017, Pages 77-96]
Kazemirad, Siavash Nondestructive thickness mapping of corroded plate structures using guided lamb wave propagation [Volume 7, Issue 1, 2021, Pages 15-28]
Keshavarz, Reza Effect of non-acoustic properties on the sound absorption of polyurethane foams [Volume 1, Issue 2, 2015, Pages 122-132]
Khajavi, Reza MPI- and CUDA- implementations of modal finite difference method for P-SV wave propagation modeling [Volume 2, Issue 2, 2016, Pages 185-202]
Khalafi, Vahid Free vibration analysis of variable stiffness composite laminated thin skew plates using IGA [Volume 4, Issue 2, 2018, Pages 171-188]
Kheshti, Mohammad Reza Stabilization of a 5-D hyperchaotic Rikitake system with unknown parameters [Volume 6, Issue 2, 2020, Pages 201-216]
Khodayari, Akram A new multi-switch circuit with adaptive capacitance for semi-active piezoelectric shunt damping [Volume 5, Issue 2, 2019, Pages 177-190]
Khorand, Hadi Investigation of the efficiency of various reactive mufflers by noise reduction and transmission loss analyses [Volume 4, Issue 2, 2018, Pages 125-140]
Khorshidi, Korosh A theoretical approach for flexural behavior of FG vibrating micro-plates with piezoelectric layers considering a hybrid length scale parameter [Volume 6, Issue 1, 2020, Pages 51-68]
Khosroupour Arabi, Mostafa Acoustical Analysis of a Structure with an Auxetic Honeycomb and Internal Resonator [Volume 8, Issue 2, 2022]
Kiakojouri, Amirmasoud Comparison between shock pulse method and vibration analysis methods on early fault detection of rolling element bearing [Volume 7, Issue 2, 2021, Pages 139-156]
Koochakinejad, Ali Analytical Determination of Bouc-Wen Friction Model of Two Contacted Flat Rough Surfaces in Elastic Region [Volume 7, Issue 2, 2021]

L

Loghmani, Ali Acoustical simulation, design and experimental investigation of a classroom: A case study [Volume 9, Issue 2, 2023, Pages 1-20]
Loghmani, Masih Exact analytical approach for free longitudinal vibration of nanorods based on nonlocal elasticity theory from wave standpoint [Volume 3, Issue 1, 2017, Pages 61-76]
Lotfi, Saeid Study on transferred impulse and response of steel plate walls under various impulsive loading considering mesh size effects [Volume 4, Issue 1, 2018, Pages 65-80]

M

Maasoomi, Mohsen Application of the method of multiple scales for nonlinear vibration analysis of mechanical systems with dry and lubricated clearance joints [Volume 3, Issue 1, 2017, Pages 41-60]
Madinei, Hadi Detection of localized nonlinearity in dynamical systems using base excitation experimental results [Volume 6, Issue 1, 2020, Pages 35-50]
Mahjoob, Mohammad Finite element model updating of a geared rotor system using particle swarm optimization for condition monitoring [Volume 5, Issue 2, 2019, Pages 95-114]
Mahmoodabadi, Mohammad Javad Vibration damping of piezo actuating composite beams based on the multi-objective genetic algorithm [Volume 6, Issue 2, 2020, Pages 325-336]
Mahnama, Maryam Finite element model updating of a geared rotor system using particle swarm optimization for condition monitoring [Volume 5, Issue 2, 2019, Pages 95-114]
Mahzoon, Mojtaba Experimental control of a ‎f‎lexible ‎l‎ink ‎by ‎the ‎method ‎of‎ ‎Controlled Lagrangian [Volume 4, Issue 1, 2018, Pages 81-98]
Malakooti, Mohammad Hossein Adhesive joint modeling using compatible element formulation [Volume 2, Issue 2, 2016, Pages 133-144]
Mardanshahi, Ali Nondestructive thickness mapping of corroded plate structures using guided lamb wave propagation [Volume 7, Issue 1, 2021, Pages 15-28]
Markine, Valeri Study on different solutions to reduce the dynamic impacts in transition zones for high-speed rail [Volume 3, Issue 2, 2017, Pages 199-222]
Mashal, Mahmoud Study on the dynamic behavior of cylindrical steel liquid storage tanks using finite element method [Volume 2, Issue 2, 2016, Pages 145-166]
Masih-Tehrani, Masoud GT Car's CG height control on a rough road by using series active variable geometry suspension [Volume 6, Issue 2, 2020, Pages 348-363]
Masoumi, Abolfazl Numerical and analytical investigation of an ultrasonic assisted ECAP process [Volume 2, Issue 2, 2016, Pages 167-184]
Masoumi, Arian Wave propagation analysis of magneto-electro-thermo-elastic nanobeams using sinusoidal shear deformation beam model and nonlocal strain gradient theory [Volume 5, Issue 2, 2019, Pages 153-176]
Mazidi, Abbas Experimental investigation of the gyroscopic and rotary inertia effects on the chatter boundary in a milling process [Volume 5, Issue 2, 2019, Pages 115-130]
Meshkabadi, Paria Assessment of the acoustical condition of metro stations by emphasizing auditory satisfaction (Case Studies: Saat and Khayyam Metro Stations) [Volume 7, Issue 2, 2021, Pages 118-138]
Meshki, Mohammad Mehdi Identification of Dynamic Damping Properties of a Flexible Structural Adhesive [Volume 1, Issue 1, 2015, Pages 32-40]
Mirdamadi, Hamid Reza A finite element model for extension and shear modes of piezo-laminated beams based on von Karman's nonlinear displacement-strain relation [Volume 2, Issue 1, 2016, Pages 35-64]
Mirdamadi, Hamid Reza Spectrally formulated finite element for vibration analysis of an Euler-Bernoulli beam on Pasternak foundation [Volume 2, Issue 2, 2016, Pages 119-132]
Mirfarah, Motahareh Investigation on the effects of measurement and temporal uncertainties on rolling element bearings prognostics [Volume 6, Issue 1, 2020, Pages 1-16]
Mirzaei, Mehdi Artificial neural network to predict the health risk caused by whole body vibration of mining trucks [Volume 3, Issue 1, 2017, Pages 1-14]
Mirzaei, Mehdi An integrated strategy for vehicle active suspension and anti-lock braking systems [Volume 3, Issue 1, 2017, Pages 97-110]
Mirzaei Nasirabad, Hosein Artificial neural network to predict the health risk caused by whole body vibration of mining trucks [Volume 3, Issue 1, 2017, Pages 1-14]
Modarres-Aval, Amirhossein Evaluation of cantilever plates in the spinning situation: time histories and modal characteristics [Volume 6, Issue 1, 2020, Pages 17-34]
Modarres-Aval, Amir Hossein Free vibration and aeroelastic analyses of rectangular cantilever plates including correlation with experiment [Volume 6, Issue 1, 2020, Pages 103-118]
Mohammadebrahim, Abolfazl Instantaneous Angular Speed (IAS) signal for abnormal combustion diagnosis in an I.C. engine [Volume 7, Issue 1, 2021, Pages 1-14]
Mohammadi, Hossein Analyzing dynamical snap-through of a size dependent nonlinear micro-resonator via a semi-analytic method [Volume 4, Issue 1, 2018, Pages 19-36]
Mohammadi, Hossein Primary resonance of an Euler-Bernoulli nano-beam modelled with second strain gradient [Volume 5, Issue 1, 2019, Pages 55-68]
Mohammadi, Hossein Stabilization of a 5-D hyperchaotic Rikitake system with unknown parameters [Volume 6, Issue 2, 2020, Pages 201-216]
Mohammadi, Mahya Investigation of the efficiency of various reactive mufflers by noise reduction and transmission loss analyses [Volume 4, Issue 2, 2018, Pages 125-140]
Mohammadi, Saber A new multi-switch circuit with adaptive capacitance for semi-active piezoelectric shunt damping [Volume 5, Issue 2, 2019, Pages 177-190]
Mohammadi, Somaye Reduction of tire noise by modifying tread pattern characteristics [Volume 7, Issue 2, 2021, Pages 88-98]
Mohammadian, Mohammad Disturbance rejection of three-axis gimbal mechanism using PSO-optimized Fuzzy-PID controller [Volume 6, Issue 2, 2020, Pages 301-324]
Mohammadi Daniali, Hamidreza Nonlinear Dynamics and Control of Crank-Slider Mechanism with Multiple Clearance Joints [Volume 1, Issue 1, 2015, Pages 21-31]
Mohammad Khanlo, Heshmatolah The effect of distance and dimensions of magnets on nonlinear behavior of piezomagnetoelastic bimorph energy harvester [Volume 4, Issue 1, 2018, Pages 37-64]
Mohammad Khanlo, Heshmatolah The influence of magnetorheological dampers on the biodynamic response of the human (pilot) body in various flight maneuvers [Volume 6, Issue 1, 2020, Pages 81-102]
Mohammadpour, Moein Nonlinear energy harvesting through a multimodal electro-mechanical system [Volume 1, Issue 2, 2015, Pages 73-84]
Mohammadrezazadeh, Shahin An analytical approach for the nonlinear forced vibration of clamped-clamped buckled beam [Volume 3, Issue 2, 2017, Pages 127-144]
Mojtahedpoor, Mohammad Numerical solution of unsteady flow on airfoils with vibrating local flexible membrane [Volume 2, Issue 1, 2016, Pages 21-34]
Mokhtari, Ali Spectrally formulated finite element for vibration analysis of an Euler-Bernoulli beam on Pasternak foundation [Volume 2, Issue 2, 2016, Pages 119-132]
Mokhtari, Ali Experimental investigation of the gyroscopic and rotary inertia effects on the chatter boundary in a milling process [Volume 5, Issue 2, 2019, Pages 115-130]
Mollaali, Amirhossein Investigation on the effects of measurement and temporal uncertainties on rolling element bearings prognostics [Volume 6, Issue 1, 2020, Pages 1-16]
Mollajafari, Morteza GT Car's CG height control on a rough road by using series active variable geometry suspension [Volume 6, Issue 2, 2020, Pages 348-363]
Moradi, Mojtaba Optimal integrated passive/active design of the suspension system using iteration on the Lyapunov equations [Volume 1, Issue 2, 2015, Pages 96-106]
Mortazavi Yazdi, Seyed Mehdi Vibration damping of piezo actuating composite beams based on the multi-objective genetic algorithm [Volume 6, Issue 2, 2020, Pages 325-336]
Mosayebi, Masoud Test planning and operational modal analysis of a wind turbine tower; application to its dynamic behavior [Volume 6, Issue 1, 2020, Pages 143-158]
Moslem, Kazem Damage detection of multi-girder bridge superstructure based on the modal strain approaches [Volume 5, Issue 1, 2019, Pages 21-42]
Moslem, Kazem Damage Diagnosis of Bridge Girders via Modal Flexibility Deflections, Inertia Force vectors, and strain energies [Volume 6, Issue 2, 2020, Pages 364-387]

N

Naderi, Alireza Numerical solution of unsteady flow on airfoils with vibrating local flexible membrane [Volume 2, Issue 1, 2016, Pages 21-34]
Nahvi, Hassan Transverse vibration and instability of fluid conveying triple-walled carbon nanotubes based on strain-inertia gradient theory [Volume 1, Issue 2, 2015, Pages 62-72]
Nahvi, Hassan Nonlinear vibration analysis of axially moving strings in thermal environment [Volume 4, Issue 2, 2018, Pages 153-170]
Najafizadeh, Nima Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming [Volume 5, Issue 1, 2019, Pages 1-10]
Naraghi, Mahyar Optimal integrated passive/active design of the suspension system using iteration on the Lyapunov equations [Volume 1, Issue 2, 2015, Pages 96-106]
Naraghi, Mahyar Experimental control of a ‎f‎lexible ‎l‎ink ‎by ‎the ‎method ‎of‎ ‎Controlled Lagrangian [Volume 4, Issue 1, 2018, Pages 81-98]
Naseri, Rahime Optimal characteristics determination of engine mounting system using TRA mode decoupling with emphasis on frequency responses [Volume 3, Issue 2, 2017, Pages 111-126]
Nazemi, Elham Assessment of the acoustical condition of metro stations by emphasizing auditory satisfaction (Case Studies: Saat and Khayyam Metro Stations) [Volume 7, Issue 2, 2021, Pages 118-138]
Nazemi, Shayan GT Car's CG height control on a rough road by using series active variable geometry suspension [Volume 6, Issue 2, 2020, Pages 348-363]
Nikkhah-Bahrami, Mansour Exact analytical approach for free longitudinal vibration of nanorods based on nonlocal elasticity theory from wave standpoint [Volume 3, Issue 1, 2017, Pages 61-76]
Nouri, Amin A method to reduce wall mounted boiler noise pollution by a sustainable approach [Volume 6, Issue 1, 2020, Pages 133-142]

O

Ohadi, Abdolreza Robust Identification of Smart Foam Using Set Mem-bership Estimation in A Model Error Modeling Frame-work [Volume 1, Issue 1, 2015, Pages 1-9]
Ohadi, Abdolreza Effect of non-acoustic properties on the sound absorption of polyurethane foams [Volume 1, Issue 2, 2015, Pages 122-132]
Ohadi, Abdolreza A magnetorheological fluid damper for robust vibration control of flexible rotor-bearing systems: A comparison between sliding mode and fuzzy approaches [Volume 3, Issue 1, 2017, Pages 77-96]
Ohadi, Abdolreza Optimal characteristics determination of engine mounting system using TRA mode decoupling with emphasis on frequency responses [Volume 3, Issue 2, 2017, Pages 111-126]
Ohadi, Abdolreza Reduction of tire noise by modifying tread pattern characteristics [Volume 7, Issue 2, 2021, Pages 88-98]
Oveissi, Soheil Transverse vibration and instability of fluid conveying triple-walled carbon nanotubes based on strain-inertia gradient theory [Volume 1, Issue 2, 2015, Pages 62-72]

P

Pak, Abbas Optimisation, development and evaluation of a tractor seat suspension via artificial intelligent method [Volume 9, Issue 2, 2023, Pages 54-64]
Partovi Aria, Hadi Vibrational energy harvesting from a monostable piezomagnetoelastic structure with multi-frequency excitation [Volume 6, Issue 2, 2020, Pages 337-347]
Pashaei, Mohammad Hadi Nonlinear energy harvesting through a multimodal electro-mechanical system [Volume 1, Issue 2, 2015, Pages 73-84]
Petoft, Hamed Free vibration analysis of multi-cracked micro beams based on Modified Couple Stress Theory [Volume 4, Issue 2, 2018, Pages 205-222]
Petoft, Hamed Investigating the vibration of cracked micro-cantilever beam with concentrated mass and rotary inertia based on MCST [Volume 9, Issue 2, 2023, Pages 39-53]
Peyman, Safa Investigation of dynamic-thermal stress intensity factor in functionally-graded plates having an edge crack [Volume 7, Issue 1, 2021, Pages 72-87]
Pombo, João Study on different solutions to reduce the dynamic impacts in transition zones for high-speed rail [Volume 3, Issue 2, 2017, Pages 199-222]
Popa, Marius New Dynamic Balancing System Based on Magnetic Interaction and Software Removal of some Perturbations [Volume 1, Issue 1, 2015, Pages 41-47]

R

Rabiee, Amir Hossein Galloping and VIV control of square-section cylinder utilizing direct opposing smart control force [Volume 5, Issue 1, 2019, Pages 69-84]
Rabiee, Amir Hossein Disturbance rejection of three-axis gimbal mechanism using PSO-optimized Fuzzy-PID controller [Volume 6, Issue 2, 2020, Pages 301-324]
Rafeeyan, Mansour A periodic folded piezoelectric beam for efficient vibration energy harvesting [Volume 3, Issue 2, 2017, Pages 223-238]
Rafieian, Farzad Attenuating vibration transmission from a Town Board Station (TBS) to the neighbor residential building using an optimum isolator: A case study [Volume 5, Issue 1, 2019, Pages 43-54]
Rafieian, Farzad Instantaneous Angular Speed (IAS) signal for abnormal combustion diagnosis in an I.C. engine [Volume 7, Issue 1, 2021, Pages 1-14]
Rafieian, Farzad Optimisation, development and evaluation of a tractor seat suspension via artificial intelligent method [Volume 9, Issue 2, 2023, Pages 54-64]
Rahi, Abbas Free vibration analysis of multi-cracked micro beams based on Modified Couple Stress Theory [Volume 4, Issue 2, 2018, Pages 205-222]
Rahi, Abbas Vibration analysis of two-layered microplate based on the modified couple stress theory using penalty approach [Volume 8, Issue 1, 2022, Pages 1-12]
Rahi, Abbas Investigating the vibration of cracked micro-cantilever beam with concentrated mass and rotary inertia based on MCST [Volume 9, Issue 2, 2023, Pages 39-53]
Rahimdel, Mohammad Javad Artificial neural network to predict the health risk caused by whole body vibration of mining trucks [Volume 3, Issue 1, 2017, Pages 1-14]
Rahmani, Arash In-plane and out of plane free vibration in nano ultra-thin film using a general nonlocal Kirchhoff ultra-thin film model [Volume 6, Issue 1, 2020, Pages 159-182]
Rahmanian, Sasan Nonlinear dynamic analysis of a four-bar mechanism having revolute joint with clearance [Volume 2, Issue 1, 2016, Pages 91-106]
Rajabi, Majid Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming [Volume 5, Issue 1, 2019, Pages 1-10]
Rajaei, Majid System identification of a beam with frictional contact [Volume 5, Issue 1, 2019, Pages 11-20]
Rajaei, Majid Modeling and identification of nonlinear behavior of friction vibratory separators using iwan model [Volume 9, Issue 1, 2023, Pages 1-13]
Ravanbod, Mohammad Experimental study on the impact of variations in the friction material properties on the vibration behaviour of brake pads [Volume 9, Issue 2, 2023, Pages 21-38]
Razavi, Seyed Esmail Investigation of the efficiency of various reactive mufflers by noise reduction and transmission loss analyses [Volume 4, Issue 2, 2018, Pages 125-140]
Razavi, Vahid Study on the dynamic behavior of cylindrical steel liquid storage tanks using finite element method [Volume 2, Issue 2, 2016, Pages 145-166]
Rezaei, Masoud Effects of higher-order terms in aerodynamic force on the nonlinear response of a galloping PZT energy harvester [Volume 6, Issue 2, 2020, Pages 271-280]
Rostami, Hamidreza Evaluation of cantilever plates in the spinning situation: time histories and modal characteristics [Volume 6, Issue 1, 2020, Pages 17-34]
Rostami, Hamidreza Free vibration and aeroelastic analyses of rectangular cantilever plates including correlation with experiment [Volume 6, Issue 1, 2020, Pages 103-118]

S

Saberi, Mohammad Vibration simulation and fatigue life estimation of a printed circuit board using a validated model [Volume 7, Issue 1, 2021, Pages 29-42]
Sadighi, Ali Vibrational energy harvesting from a monostable piezomagnetoelastic structure with multi-frequency excitation [Volume 6, Issue 2, 2020, Pages 337-347]
Safizadeh, Mir Saeed Wave propagation analysis of magneto-electro-thermo-elastic nanobeams using sinusoidal shear deformation beam model and nonlocal strain gradient theory [Volume 5, Issue 2, 2019, Pages 153-176]
Salahshoor, Esmaeil Application of the method of multiple scales for nonlinear vibration analysis of mechanical systems with dry and lubricated clearance joints [Volume 3, Issue 1, 2017, Pages 41-60]
Salehzadeh Nobari, Ali Identification of Dynamic Damping Properties of a Flexible Structural Adhesive [Volume 1, Issue 1, 2015, Pages 32-40]
Salehzadeh Nobari, Ali Hybrid method for studying the effect of the material change on the blade vibration behavior [Volume 5, Issue 2, 2019, Pages 85-94]
Samadani Agdam, Sayyed Samad Investigation of reducing road-induced loads on sensitive payloads carried by road vehicles using a secondary suspension system containing double-ended magnetorheological dampers [Volume 6, Issue 2, 2020, Pages 388-409]
Samadiyeh, Hossein MPI- and CUDA- implementations of modal finite difference method for P-SV wave propagation modeling [Volume 2, Issue 2, 2016, Pages 185-202]
Sañudo, Roberto Study on different solutions to reduce the dynamic impacts in transition zones for high-speed rail [Volume 3, Issue 2, 2017, Pages 199-222]
Sarvestan, Vahid Spectrally formulated finite element for vibration analysis of an Euler-Bernoulli beam on Pasternak foundation [Volume 2, Issue 2, 2016, Pages 119-132]
Sattarvand, Javad Artificial neural network to predict the health risk caused by whole body vibration of mining trucks [Volume 3, Issue 1, 2017, Pages 1-14]
Sepehri, Soroush Analyzing dynamical snap-through of a size dependent nonlinear micro-resonator via a semi-analytic method [Volume 4, Issue 1, 2018, Pages 19-36]
Sepehri, Soroush Primary resonance of an Euler-Bernoulli nano-beam modelled with second strain gradient [Volume 5, Issue 1, 2019, Pages 55-68]
Seyedin, Seyed Alireza Three-dimensional underwater image formation with inverse synthetic aperture sonar [Volume 6, Issue 2, 2020, Pages 249-270]
Seyed Kanani, Ali Reza Robust Identification of Smart Foam Using Set Mem-bership Estimation in A Model Error Modeling Frame-work [Volume 1, Issue 1, 2015, Pages 1-9]
Shabani, Ramin A one-dimensional model for variations of longitudinal wave velocity under different thermal conditions [Volume 2, Issue 1, 2016, Pages 79-90]
Shabani, Ramin Variations of ultrasonic wave attenuation in thick-walled cylinders subjected to a thermal gradient [Volume 7, Issue 1, 2021, Pages 43-54]
Shabgard, Mohammad Reza Investigation of reducing road-induced loads on sensitive payloads carried by road vehicles using a secondary suspension system containing double-ended magnetorheological dampers [Volume 6, Issue 2, 2020, Pages 388-409]
Shafei, Ali Mohammad Automatic formulation of falling multiple flexible-link robotic manipulators using 3×3 rotational matrices [Volume 3, Issue 1, 2017, Pages 15-40]
Shafei, Erfan Isogeometric analysis: vibration analysis, Fourier and wavelet spectra [Volume 3, Issue 2, 2017, Pages 145-164]
Shafiei Alavijeh, Maryam Experimental and numerical study of delamination detection in a WGF/epoxy composite plate using ultrasonic guided waves and signal processing tools [Volume 4, Issue 2, 2018, Pages 141-152]
Shahabi, Ehsan Nonlinear lap joint interface modeling and updating strategies for assembled structures [Volume 5, Issue 2, 2019, Pages 131-152]
Shahhoseini, Ahad A method to reduce wall mounted boiler noise pollution by a sustainable approach [Volume 6, Issue 1, 2020, Pages 133-142]
Shirazi Parsa, Mohammad Javad Fluid-structure interaction and vibration analysis of the fuel system of a turbofan engine with optimal dimensions [Volume 6, Issue 2, 2020, Pages 281-300]
Shokrollahi, Saeed Finite element model updating of bolted lap joints implementing identification of joint affected region parameters [Volume 2, Issue 1, 2016, Pages 65-78]
Sobhanirad, Sima A novel modeling of energy extraction from nonlinear vortex-induced vibrations [Volume 6, Issue 2, 2020, Pages 217-232]
Soorgee, Mohammad Hossein Experimental and numerical study of delamination detection in a WGF/epoxy composite plate using ultrasonic guided waves and signal processing tools [Volume 4, Issue 2, 2018, Pages 141-152]

T

Taghipour, Javad Detection of localized nonlinearity in dynamical systems using base excitation experimental results [Volume 6, Issue 1, 2020, Pages 35-50]
Tahmasebi, Mona Application of intelligent adaptive force control for a helicopter seat suspension [Volume 6, Issue 1, 2020, Pages 183-200]
Tahmasebi, Mona Optimisation, development and evaluation of a tractor seat suspension via artificial intelligent method [Volume 9, Issue 2, 2023, Pages 54-64]
Tahmasebi Moradi, Ahmad Ali A finite element model for extension and shear modes of piezo-laminated beams based on von Karman's nonlinear displacement-strain relation [Volume 2, Issue 1, 2016, Pages 35-64]
Talebi, Heidar Ali Optimal characteristics determination of engine mounting system using TRA mode decoupling with emphasis on frequency responses [Volume 3, Issue 2, 2017, Pages 111-126]
Talebitooti, Roohollah Wave propagation analysis of magneto-electro-thermo-elastic nanobeams using sinusoidal shear deformation beam model and nonlocal strain gradient theory [Volume 5, Issue 2, 2019, Pages 153-176]
Talebitooti, Roohollah Effects of higher-order terms in aerodynamic force on the nonlinear response of a galloping PZT energy harvester [Volume 6, Issue 2, 2020, Pages 271-280]
Talebitooti, Roohollah Acoustical Analysis of a Structure with an Auxetic Honeycomb and Internal Resonator [Volume 8, Issue 2, 2022]
Tamizifar, Mohammad Test planning and operational modal analysis of a wind turbine tower; application to its dynamic behavior [Volume 6, Issue 1, 2020, Pages 143-158]
Tavakoli, Ehsan Modeling and identification of nonlinear behavior of friction vibratory separators using iwan model [Volume 9, Issue 1, 2023, Pages 1-13]
Tikani, Reza A finite element model for extension and shear modes of piezo-laminated beams based on von Karman's nonlinear displacement-strain relation [Volume 2, Issue 1, 2016, Pages 35-64]
Tikani, Reza Nonlinear vibration analysis of axially moving strings in thermal environment [Volume 4, Issue 2, 2018, Pages 153-170]
Torabi, Mohammad Reza Acoustical simulation, design and experimental investigation of a classroom: A case study [Volume 9, Issue 2, 2023, Pages 1-20]

V

Vahidi-Moghaddam, Amin Robust adaptive vibration control of nonlocal strain gradient [Volume 7, Issue 2, 2021, Pages 99-117]

Y

Yaqubi, Sadeq Nonlinear Dynamics and Control of Crank-Slider Mechanism with Multiple Clearance Joints [Volume 1, Issue 1, 2015, Pages 21-31]
Yazdanian, Mohsen Study on the dynamic behavior of cylindrical steel liquid storage tanks using finite element method [Volume 2, Issue 2, 2016, Pages 145-166]
Yousefpour, Amin Multi-frequency piezomagnetoelastic energy harvesting in the monostable mode [Volume 4, Issue 1, 2018, Pages 1-18]
Yousefpour, Amin Robust adaptive vibration control of nonlocal strain gradient [Volume 7, Issue 2, 2021, Pages 99-117]

Z

Zahrai, Seyed Mehdi Study on transferred impulse and response of steel plate walls under various impulsive loading considering mesh size effects [Volume 4, Issue 1, 2018, Pages 65-80]
Zarei, Mohamad Javad Investigation of Similarity or Dissimilarity in Aerodynamic Performance and Noise Pollution of H-Darrieus Wind Turbines [Volume 8, Issue 2, 2022]
Zareinejad, Mohammad Transverse and longitudinal dynamic modeling of bimorph piezoelectric actuators with investigating the effect of vibrational modes [Volume 4, Issue 1, 2018, Pages 99-124]
Ziaei-Rad, Saeed A finite element model for extension and shear modes of piezo-laminated beams based on von Karman's nonlinear displacement-strain relation [Volume 2, Issue 1, 2016, Pages 35-64]
Ziaei-Rad, Saeed Test planning and operational modal analysis of a wind turbine tower; application to its dynamic behavior [Volume 6, Issue 1, 2020, Pages 143-158]